ROLLER LADDER RACK
Model 2007-3
 
ROLLER RACK MODEL 2007-3
| • |
Professional-duty steel rack is designed to carry long or heavy extension ladders or other rigid cargo up to 18 inches wide and weighing up to 250-lbs. |
| • |
World’s only side-mounted truck rack with pivoting roller to load and unload long or heavy extension ladders or other rigid cargo. |
| • |
Two universal receivers permanently mount to the inside of the bedrail at the front and back of the bed, and two rack frames quickly insert into or remove from them. |
| • |
One rack frame is fixed and the other frame has a pivoting cross-bar with a roller. Either frame can be placed in the front or back receiver depending on conditions. |
| • |
Use the tie-down loop on each frame to secure cargo with ropes or straps or use the integrated ladder latch to lock down your ladder without bungee cords, straps or ropes. The latches can also be padlocked to prevent removal of the ladder. |
| • |
Adjusts in height so cargo rides the correct distance above the cab. |
The best choice for the tradesman who must carry heavy extension ladders! Rack exterior is powder-coated black. Threaded hardware is stainless steel. Box size is 42 x 20 x 4 inches; weight is 42 lbs.
Fits trucks with ordinary fleetside bedrails. *NOTE: Will NOT fit older model Ford Supercrews (before 2004), Ford Explorer Sport-track, Chevy Avalanche, Honda Ridgeline or any truck with a plastic bed. Will not fit step-side trucks or 4-door trucks where the rear wheel wells are located directly against the front wall of the cargo box such as the 4 door Tacoma, Frontier, Colorado or Canyon.
The Roller Ladder Rack FITS: most trucks with ordinary fleetside bedrails.*
Price: $239, delivered (in lower 48 states) Add to cart |
